Installation Guide
Exterior Garage Door Covers
Follow the steps below to install your exterior garage door cover securely in minutes.
No tools required. Easy installation. Safe for standard residential garage doors.
Your exterior garage door cover is designed for fast installation and a clean, premium look. Simply follow the steps below for a secure, professional finish.
Watch the Installation Video
We recommend watching this short video before installing your cover.
Exterior Cover Installation Steps
-
1Clean and dry the garage door surface
-
2Apply Velcro along the top edge
-
3Attach the top of the cover and press firmly
-
4Smooth the cover downward evenly
-
5Hook the elastic cord securely
Tip: Smooth from the center outward for best results.
Extra Tips for a Stronger Hold
If you want extra security and long-term hold, these tips are used successfully by many customers:
• Use the inside-top method:
Open the garage door fully and apply the Velcro along the very top across the door panel. Attach the top of the cover while the door is open, then slowly close the door. Once closed, the cover sits behind the weather stripping and is pressed firmly against the frame for a locked-in hold.
• Reduce tension on the Velcro:
Attach the elastic hooks slightly lower on the door and fully extend the hooks. This minimizes upward pressure and helps the Velcro stay secure.
• Press Velcro firmly:
When applying Velcro strips, press evenly and firmly for 10–15 seconds to ensure strong adhesion.
These steps greatly improve stability and help keep your cover secure over time.
Your exterior garage door cover is now installed. Enjoy the secure hold and impressive visual transformation.